rear 2 pots

[wrxR176]

Hey

Since i will be swapping the JDM STi drivetrain I will need to get the 2 pot rear calipers the bolt up to the STi hub. If anyone knows where I could find some of these let me know.

Thanks
Paul

[oldguy]

If Dan and Frank don't have them, then contact
Dave @ Rallispec. He has them (new).

[wrxR176]

Thanks Rob

4Star doesnt have any right now so I will give Rallispec a call.

[wrxR176]

Ok need to confirm some info. With the JDM hub in the rear i will need the 2 pot caliper. I need to find out what rotor and pad to run. As far as I can see the right rotor to run would be a 05 Legacy GT rear rotor with the 06/07 WRX pad. If this is incorrect let me know what I should be buying for the swap.

Thanks
Paul

[oldguy]

You will find what you need right here:

http://www.rallispec.com/prod_brake.htm

You can buy DBA vented + slotted rotors as
well... and although they are available only
with a 5x100 pcd, they are easily drilled for
a 5x114.3 pcd.

~~

Tell Dave what you want to do and he'll guide
you through the parts selection/set-up choices.

You can tell him that I sent you.

[Sir-knight]

if it's the red 2 pots you're looking for, there might be a set here in ottawa, brand new

http://www.ottawasubaru.com/forum/viewtopic.php?t=17601

there is also a potential parts shuttle leaving on the friday evening from ottawa to barrie for ATTS/regional in the form of klaus...

[Chris_Martin]

All the 2 pot calipers are the same i believe.

The kit listed on the link above is a pretty good deal, as i believe it includes new rotors, and pads.

RST-2631 GroupN 2-pot Rear Brake Kit R180 (5-100)