PDA

View Full Version : WTB: 2002+ EJ25 SOHC Passenger side head



valheru
01-13-2010, 08:38 AM
Well this sucks, the passenger side head that I have for my n/a build has a pretty badly scored journal on both the the cam and head, so I need a replacement ASAP cause the P&P on the first head is complete and my project is now on hold.

Note: There is too much material to remove to have the head line bored and the cam rebuilt/reground.

What I need:

-2002+ EJ25 SOHC Passenger side head;
-No bent valves;
-From a "properly running" donner engine;
-Don't care if the valve seat are gummed up and don't seal properly as long as the valve play (valve shaft/valve guide) is good, these are going to be refreshed anyway (3 angle valve regrind);
-Preferably on the "cheap" side of the coin.

Thanks a bunch.

Denis

gregger
01-15-2010, 03:23 PM
I might have what your looking. Only thing is mine are from a 2000 legacy. As for for cheap yes they would be cheap.
Let me know. I will pull them off the motor and have a look at them.

valheru
01-17-2010, 10:58 PM
I found one localy, but still need to open it and make sure all is well with it.

I'll post up if I still need one or not.