Page 2 of 2 FirstFirst 1 2
Results 21 to 22 of 22

Thread: How to Mod a car for Competition

  1. #21

    Re: How to Mod a car for Competition

    I think the short answer would be that a stiffer front bar reduces front body roll, thereby allowing the tires to maintain a more constant contact patch and reducing rolling onto the sidewalls. Going too extreme with the front bar though I would think might cause lifting of the inside front wheel, which would I'm sure drastically increase understeer ;-)

  2. #22

    Re: How to Mod a car for Competition

    my comments on the front bar were when the events were on very tight courses, the low speed turns on these courses severeely limited front end grip.

    This post is 2 years old and a lot has been learned since then and the courses have changed dramaticly

    Co-Founder SPDA, Subaru Performance Drivers Association.
    Turning money into noise one dollar at a time.
    2007 Targa 2nd Unlimited
    2007 Targa Nations Cup Winner
    2005 Spirit of Targa Winner
    2005 Ontario Solo 2 Champion E/SP
    2004 Canadian Solo 2 Cham...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts