I just got an alignment done not very happy with the results
Also I found out my caster is way off on one side how can this be fixed ?
Any info be great thxs
I just got an alignment done not very happy with the results
Also I found out my caster is way off on one side how can this be fixed ?
Any info be great thxs
Scott at Canalignment is were most of us go.. He builds race cars, he's also a race instructor and he does complete chassis setups including corner balancing.
+1 to Scott. He is the only guy I trust too.
#46 STX BRS
There are lots of good alignment guys. Very few great ones. Scott at Can-alignment is one of the great ones.
Frank - I drive a Nissan
#259
Scott was able to adjust the caster on my '97 Legacy. How far off is your caster? Do you have a handling issue? Scott also corner balances coilovers.
Last edited by STeveD; 10-20-2012 at 10:23 AM.
Stephen - I drive Blue Subarus of the rally and track varietals.
Thanks guys
Caster is off by a finger or more left side is 2 fingers tire to bumper right side is 3
Btw where is Scott located nvm quick google found him
Holy hell 3 hr trip to Scott's that's a bit far
Last edited by 1sti2nv; 10-20-2012 at 09:25 PM.
Caster goes off when you hit a big enough hole to push the control arm back. Our Subaru's specially your year do not have adjustable caster, the arm may need to be put under tension to pull it back to spec, or better yet, slightly more than spec. (More Caster the better).
Alright thxs joe long time btw how u been
I think the white line bushing have slots to move a bit but not much
Not sure I'll go to scotts that's a bit to far 6 hr drive there and back
Doing great actually, looks like you turned your car in to a race car, that's cool. You can actually slot the rear control arm mounts and get some caster that way, Scott has the ability to do that and there's enough compliancy in the front bushing to take the offset. On the STI, the aluminum front control arm has a separate pivot rod that goes into the bushing, that may have bent, if it's bent you can purchase a new one from the dealer, it's held on by 2 bolts.
Alright I'll have to take a look
And the car is still street driven
http://maps.google.ca/maps?hl=en&qsc...ed=0CHcQ_BIwAA
I have heard a couple of people say some browsers still have me up by Owen Sound, this is the correct location
http://www.can-alignment.com
http://www.facebook.com/CanAlignment/
SPDA Race and Time-Attack Scrutineer
CASC-OR Chief Instructor
SPDA Race Ambassador
Oh great that's not far at all expect a call from me soon thxsOriginally Posted by racecartech
Scott at Can-Alignment for any performance alignment. You can't get much better, and he's part of our car club.
Laszlo - red '17 WRX
The all-new Subaru WRX is coming. Pardon our dust.
Owen Sound! LOL! When were you in Owen Sound. You better get that guy who built your website give you a refund!
...
Wait, if it's the browser it's not his fault.
Frank - I drive a Nissan
#259
actually web master, can you tell me why it happens? or does any web savvy person know why? I am registered with Google places and have been for 3 years but some searches come up with that error.
Thanks
http://www.can-alignment.com
http://www.facebook.com/CanAlignment/
SPDA Race and Time-Attack Scrutineer
CASC-OR Chief Instructor
SPDA Race Ambassador
Scott,
What search engine shows you at Owen Sound?
Went to see Scott today made my appointment for Thursday can't wait to get it all setup right
I do not see it any longer. I have done several searches, fixed maps, claimed listings.......but I hear it still happens. When I ask each person does not remember where they where looking
http://www.can-alignment.com
http://www.facebook.com/CanAlignment/
SPDA Race and Time-Attack Scrutineer
CASC-OR Chief Instructor
SPDA Race Ambassador
Car was done yesterday it feels great way better nice and planted thanks scott will be sure to send anyone who ask me where to get an alignment
Posting Permissions
Reply With Quote